Iron Shots Basics

Hitting Irons In Golf: Guide For Novices


Let’s admit, all golf players like to hit a huge drive off the tee and over the treetops towards the hole. Long drives won’t create a point if you don’t know how to sink a putt, but long drives are so great to apply with your new acquaintances. The short shot with an iron is as essential, if not more important, than the long shots with a wood. It may look so simple however for beginners, it is probably among the hardest shot to play. This post will help you on how to hit irons successfully.

Step #1: Alignment of the Body and Right Posture

The first step to effective hits is correct set up concerning your posture and body alignment. One common error many newbie golf players make is the bending of the body. The majority of untrained golfers makes a bend from the back over the club rather than at the waist. This will surely affect the trajectory adversely and will result in a great muscle pain in the back. Keep a straight back but not rigid in playing golf. Tilt with your waist as well as have a swing by the hips. To maintain the balance while doing the swing, it is crucial to have your body in even position over the feet.

Step #2: Ball Position

Ball position is usually neglected in setting an iron shot. As important as long drives, short shot position should also be considered by golf players. When talking about ball position here, we’re talking about its position according to your body setup. The ball being not farther back on the sternum and not far enough beyond your left armpit is the appropriate ball and body position. One mistake novices make is playing the shot too far forward resulting in poor slices and putts. You must try straightening your sternum when the ball moves to the ground when involved, then try hitting again.

Step #3: The Takeaway Position

The way wherein the club is pulled back and hit through is named takeaway position. The style of the takeaway is important as it contributes drastically to the kind of swing that will be enjoyed and its success. The 2-8-2 rule is being utilized when hitting an iron. The first “2” defines the first Two inches of a takeaway where the club goes straight back. It is important to move the body (arm, legs and shoulders) in sync. The “8” refers to the eight inches when in the club curves in an upward direction but without moving the wrists. At 12th inches, the wrist turns and place the shaft in a horizontal position to the ground. The hands must level to the shoulder height and the shoulder should be tight. After performing the takeaway position, follow along the target line and hit the ball by a square iron face.

Step #4: Take Consideration of the Course

As essential as the setup and follow through of the swing, the layout should also be considered. Any adjustments that need to be made to a takeaway or swing will be due to the surface on which the hit is performed. When the ball is to be performed on a downhill slope, it is best to complete a downswing at the point where the ball will fall towards the hole. For example, a slight downhill and green ground would be ideal for a slight curve to have a gravitational pull. Also, a great shot will be executed when you eliminate any obstacles along the path.

Understand how to Hit a Fade with Iron Clubs in Golf


how to hit iron shots

Golf can seem like a fairly easy sport to play upon first observation, however, as with most sports, there are many technicalities that make it quite challenging for the untrained individual. To be able to play a great game, you are required to learn lots of golfing terms and also a number of golfing methods. Fade is recognized as a popular shot hit with an iron club. It’s the famous golf player Jack Nicklaus who stated that the fade is regarded as the “bread and butter” of golfing styles and a technique that should be utilized. This article will provide information on the fade and how it could be strike with iron clubs.

Become familiar with the Fade Shot

Basically, a fade is a golfing shot that starts with a curve to the left once engaged yet falls with a curve to the right. This short shot is very beneficial if you try to hit greens and may result to greater distance due to the backspin when using irons. The real fade and the over the top fade are two kinds of fades that could be hit.

1. The Real Fade

It is important to find the right iron to reach the specific shot needs when striking the fade. It is great to get 8 iron with regards to real fade shooting which is about 5 yards long. Apart from choosing the right club, positioning of the club on swing produces the outcome of the shot.

When the face is square to the target, a real fade requires the club to make contact with the ball. Your body should be positioned to the left side of the ball and must be opened to the swing path. The fade requires an open path so that the iron will lift and spin the ball along a curvature to the targeted line.

2. The Over The Top Fade

This type of fade shot is describe as a slight fade where a small curve from left to right can be observed in the ball. To lessen the effect of the shot, it is recommended that the iron used for the over the top fade is a 7-iron. Those who’re only starting out to play golf assume that this kind of fade is because of a mistake in one’s swing or shot. A purposeful flawed fade will make an over the top fade.

When doing this kind of fade, it is important to follow a square stance with closed body alignment. Contrary to real fade that requires an open position, the swing will be “over the top” of the swing course due to the closed position. The clubface must be square to the target and strike the ball beneath causing a backspin for slight curve towards the target line.

Should Know Ideas When Striking Fades With Iron Clubs for Golf Novices

Mistakes are normally experienced by newbies because they are still beginning to discover the different shots from drives to real fades. The following are the common mistakes in terms of fade learning:

– Striking with tightened arms and short holds sending the club too far over the top.

-Releasing the club too much eliminating the capability to get an open stance when doing a swing.

– Once you hold the club face too wide with tightened wrists it will result in a slice.

– Holding the club too firmly resulting in a pull rather than a fade.

– You won’t understand that the fade is a purposeful swing to the left with curve to the right.